|
|
|
|
|
|
Our generic monitors/controllers provide an industry-standard interface to sensors — serial (RS-232), 4-20mA, or 0-5VDC — and low power requirements (AC, battery and/or solar), in compact, rugged enclosures, suitable for a wide range of data-communications and sensor-monitoring applications.
They communicate sensor readings via serial (RS-232), Ethernet, cellular or landline telecom, or satellite communications.
Choose from:
|
|
|
|
|
|
|
NEW ITEM!
Anywhere
Alerter™
COMPACT, BASIC, LOW-COST MONITOR
CLICK HERE
for DETAILS
|
9175-ARFE
|
Model 9175-ARFE Modular Local Wifi/RF Wireless Sensor Monitor
(The WiFi/RF Stack™)
|
|
|
|
The 9175-ARFE WiFi/RF Stack is a lower-cost model that uses WiFi/RF (radio) signal to transmit data from a sensor to a WiFi or RF receiver, router or switch – or to a regular 9175 Stack (see below) – up to 100 yards away. The receiving unit, in turn, relays the signal to the end-user via other communications (cellular, landline, satellite, Ethernet or RS-232 serial line).
Several lower-cost 9175-ARFE WiFi/RF Stack monitors can thus combine their communications through one full-cost 9175 Stack, radically lowering the overall instrument and communications coats.
The WiFi/RF Stack can monitor a single sensor,
and is available with a wide array of sensor modules to detect many kinds of items or conditions.
Available with battery, solar and/or AC power modules.
|
|
|
|
|
The 7082 Contactor™ (above), monitors your simple on/off sensor, switch or device, and relays the information to your cell phone via text alerts or app screens (below).
|
Model 7082 Contactor™
remote cellular monitor
|
|
|
|
The Model 7082 Contactor remote cellular monitor is a compact, very-low-cost monitor that monitors your binary (on/off) sensor, switch or device, and uses cellular signaling to transmit change-of-state (on/off) notifications to the ESI Data Center, which immediately relays text messages/alerts to up to 10 text-capable cell phones (of the user's choice), indicating the new state of the monitored switch, sensor or device.
With the free ESI Contactor App, the user can log in from any smartphone (Apple or Android) and...
- See the current status of the sensor that a Contactor is monitoring,
- Receive automatic alerts,
- See the notification history of all their Contactors,
- Configure each Contactor to sense and/or report at specific intervals.
The Contactor can monitor a single on/off sensor (or, optionally, sense power on a 120-VAC line). Long-life battery and compact, weather-resistant case provide flexibility for installation almost anywhere, anytime.
|
|
|
|
AND MORE:
|
Single-channel versions
of our
Multi-channel Monitors/Controllers
(see below)
|
|
|
NOTE:
Most of our MULTIPLE channel
monitor/controller systems
can be affordably configured for
SINGLE channel
monitoring
(often with lower price,
single channel components)
— including our most popular system,
the 9175 "Stack,"
and various other models —
providing a wider range of sensing, control & communications options
to customers with single-channel applications.
(See the next section for details on
MULTI-channel Monitors/Controllers.
)
|
|
|
|
|
|
|
|
|
|
|
|
Shown with optional external antenna for communication with other nearby monitors.
|
Model 9175 Modular Wireless Sensor Monitor
(The Stack™)
|
|
|
|
The Model 9175 ("The Stack") — our most popular and versatile system — is a modular, wireless, multi-sensor monitor.
The Stack reports sensor readings using serial (RS-232), Ethernet, landline, cellular -- the popular SMS (Small Message Service) or new LTE Cat M1 technology -- or satellite communications.
Although The Stack can be configured to work wth any internet-enabled computer, or via other computer communications, or simply via a cellular phone
with communications service — allowing you to to setup and acquire
data from nearly anywhere.
The Stack can monitor from 1 to 99 sensors (using lower-cost secondary monitor units on the additional sensors),
and is available with a wide array of sensor modules to detect many kinds of items or conditions.
Available with battery, solar and/or AC power modules.
|
|
|
|
|
|
|
 The 9230 Short Stack™ provides the most-popular features of The 9175 Stack, in a compact, inexpensive unit, for monitoring one or two sensors via cellular telecom. Shown here with optional sensor base.
|
Model 9230 Modular Wireless Sensor Monitor
(Short Stack™) |
| |
The Model 9230 ("Short Stack™")
— our latest system — is a modular, wireless, one- or two-sensor monitor, based on our most popular product, The Stack™ (Model 9175), noted above.
The Short Stack reports sensor readings using cellular communication, via the new LTE Cat M1 technology.
The only device required for you to receive data is a cellular phone
with communications service — allowing you to to setup and acquire
data from nearly anywhere.
The Short Stack can monitor one or two sensors (using attached and/or external sensors),
and is available with a wide array of sensor modules to detect many kinds of items or conditions.
Available with battery, solar and/or AC power modules.
| |
|
|
|
|
|
|
9172
PentaComm™
Satellite
Communicator |
| |
| The 9172 PentaComm satellite communicator provides remote monitoring for up to 5 sensors, via satellite communications, virtually anywhere -- no worrying about the availability of cellular coverage, landlines or other earthly communications links.
The PentaComm's rugged enclosure allows
it to meet the most demanding requirements. This
model contains a battery, satellite transceiver,
and input circuitry to connect up to five data
signals. Either 4-20ma or 0-5 volt signals may
be connected in any combination. Several options
are available to help customize the PentaComm
for specific applications. |
|
|
|
|
NOTE:
For additional monitors, configured for fluid tank monitoring,
see our
Level Devil®
tank monitoring site, at:
LevelDevilSensors.com
|
|
|
|
|
|
Expert Engineering
American Craftsmanship
Responsive Technical Support
Electronic Sensors, Inc.
is THE intelligent answer
to YOUR sensor-monitoring needs!
|
CALL US
TODAY!
(800)
886-2511
|
|
